Hello Everyone!
This guitar was advertised before, but I had to remove it, because I went on vacation with my family on short notice. So I didn't had the time to watch the replies.
The guitar is located in germany, near cologne.
It's an Edwards E-LP-130, all lacquer finish (no lacquer over...
There are a few things I immediately changed.
The wiring is totally f**** upped! It's not even a Les Paul Standard wiring. With the ESP factory wiring you can turn down the volume for each pickup individually. This will be impossible with a correct LP wiring. As soon as you turn down one...
Hello!
I have an Edwards E-LP-130. The guitar is from 2007.
I have seen on the HP of esp/edwards that the guitar should be fitted with
a Gotoh stop/tail pece, mine is definitely a Tonepro.
Also the tuners are not Gotoh as advertised on the HP, mine read Deluxe on the back.
And I don't have the...
Hello!
These are no original VH-1s!!!! The original VH-1s have the braided wire but a brass (gold) bottom and not a silver one. These look like the later VH-1s but with braided wires.
Also the electronics are not original anymore. The caps are mostly paper in oil but are a replacement. The...
Hello!
I have a Burny RLC-60 Custom all mahogany.
I can't find any seam on the top or on the back of the guitar.
It has a very thin poly finish, so you can clearly see the wood structure.
When I looked in the pup cavity and in the electronics compartment, I noticed a seam dividing top and back...