Pacifix Exclusive Limited Run Special Order Tokais
- Thread starter Sigmania
- Start date
Help Support Tokai Forum:
wulfman's "Pacifix Exclusive" LS7 Goldtop
https://www.flickr.com/photos/wulfh/albums/72157626720838427/with/5778636304/
https://www.flickr.com/photos/wulfh/sets/72157626720838427/
https://www.flickr.com/photos/wulfh/albums/72157626720838427/with/5778636304/
https://www.flickr.com/photos/wulfh/sets/72157626720838427/
Pacifix Exclusive
SN 0817199
Tokai Love Rock Pacifix Exclusive トーカイ レ... - ヤフオク!
Seller's description:
SN 0817199
Tokai Love Rock Pacifix Exclusive トーカイ レ... - ヤフオク!
Seller's description:
Tokai Les Paul model Pacifix Exclusive Custom model made in 2008. I bought it second hand before. It is a custom-made model of Pacifics, and it will be a model that is close to the specs of the vintage Les Paul in 1959. (Pacifix Exclusive is listed under the Love Rock on the head) Because the model name is unknown, some of the specs are unknown, but the lacquer finish (Tokai logo looks gold with lacquer). Brass saddle without retainer + aluminum tail It will be a high-spec model such as peace Madagascar rosewood fingerboard . The weight is 4.0 kg (measured with a scale). The pickups have been replaced with Gibson Burstbuckers since purchase. Since the lacquer coating is thin, small scratches etc. are somewhat conspicuous. The most noticeable scratches are the part where the cutaway hit and the paint peeling on the 1st string side near the 10th fret on the neck. (Images 7 and 8) The accessories will be a warranty card. Since there is no case for shipping, it will be shipped in a cardboard box. |
Attachments
Attachments
Last edited:
2007 ES-2PX SR
SN 0711965
[Jacaranda fingerboard/Honmahon neck] Tokai ES-2PX
I believe this is a model that rarely appears on the market, but I hear that it was created in collaboration with Pacific Exclusive .
The paint is lacquer. It uses a Jacaranda fingerboard and a Honduran mahogany neck, and as you would expect from Tokai, the construction is very careful.
The neck has a slightly thick impression and is solid, and is made of 1046 gauge, but it has a 12F, 1st string height of 1.5mm, and 6th string height of 2.0mm. No warping can be seen on the neck. It is lightweight, weighing around 3.5kg.
Below are the changes.
Peg: I didn't like the original greenish button, so I replaced it with a 3x3 type peg from Faber in Germany. Tailpiece: Replaced with an aluminum one also made by Faber. It is also fixed using Fixer.
Pickup: This may not be familiar to your ears, but we have included a covered version of Geppetto Guiters' Japan Limited Nomad humbucker.
I purchased it at KOIZ JAPAN, but it seems like the model is no longer available. I remember that the front used A2 and the rear used A4, but in my opinion, it is a model that is low gain and very clear and suitable for semi-acoustic. I checked the sound output before putting it up for sale, and both the volume and tone are working well.
The case comes with Gator's G-PG-335V, so I think you can use it as is to go to the studio or gig.
SN 0711965
[Jacaranda fingerboard/Honmahon neck] Tokai ES-2PX
Description of item
I will be exhibiting Tokai's ES-2PX.I believe this is a model that rarely appears on the market, but I hear that it was created in collaboration with Pacific Exclusive .
The paint is lacquer. It uses a Jacaranda fingerboard and a Honduran mahogany neck, and as you would expect from Tokai, the construction is very careful.
The neck has a slightly thick impression and is solid, and is made of 1046 gauge, but it has a 12F, 1st string height of 1.5mm, and 6th string height of 2.0mm. No warping can be seen on the neck. It is lightweight, weighing around 3.5kg.
Below are the changes.
Peg: I didn't like the original greenish button, so I replaced it with a 3x3 type peg from Faber in Germany. Tailpiece: Replaced with an aluminum one also made by Faber. It is also fixed using Fixer.
Pickup: This may not be familiar to your ears, but we have included a covered version of Geppetto Guiters' Japan Limited Nomad humbucker.
I purchased it at KOIZ JAPAN, but it seems like the model is no longer available. I remember that the front used A2 and the rear used A4, but in my opinion, it is a model that is low gain and very clear and suitable for semi-acoustic. I checked the sound output before putting it up for sale, and both the volume and tone are working well.
The case comes with Gator's G-PG-335V, so I think you can use it as is to go to the studio or gig.
Attachments
Last edited:
I recently got what was sold to me as a 2007 LS2PX, but the pickup cavity says 1PX. Great guitar whatever it is!
From post #4 above.
Apparently printed from the web site. 12/03/11
http://www.pacifix-lhd com/product/tokails 2.html
for PACIFIX Exclusive model
LS-2
Equipped with Pickup! TOKAI PAF Vintage MK2 while maintaining the basic specs of LS-1. A model with a different sound nuance.
The LS-2's body top is made of 2 pieces of solid hard maple, and the body back is made of 1 piece of Honduras mahogany. The neck is a one-piece Honduran mahogany deep joint. And the finger slope uses very valuable Jacaranda wood. The binding on the slope side is an edge binding that requires time and skill, but we applied a lacquer finish to it. The woodwork that affects the sound of the guitar is perfect. The hardware includes a cow bone nut, brass bridge saddle, and aluminum tailpiece, which transmits all the vibrations of the strings to the body. Furthermore, the internal wiring uses vintage wire GE70S, an oil condenser (sprag orange drop) for the tone circuit, and CTS for the volume, making every part luxurious.
Body: Hard Maple 2Piece Top, Honduras Mahogany 1Piece Back
Neck: Honduras Mahogany 1Piece Deep Joint
Fingerboard: Jacaranda/Fret Edge Binding
Nut: Bone
Position Mark Cell Urban Color
Bridge: HLS-VB (Brass Saddle)
Tail Piece: HLS-VT (Aluminum)
Pickups: PAF-Vintage MK2
Controls: 2 Volume, 2 Tone, 3Way Toggle SW
Inner Wire: GE70S
Volume Pot: CTS
Condenser: Oil Condenser (Sprague Orange Drop)
Finish: Lacquer Finish
Body Color: CS.VF.LD,GT, VF
Price: OPEN PRICE
*TOKAI for PACIFIX EXCLUSIVE is a made-to-order product.
Apparently printed from the web site. 12/03/11
http://www.pacifix-lhd com/product/tokails 2.html
for PACIFIX Exclusive model
LS-2
Equipped with Pickup! TOKAI PAF Vintage MK2 while maintaining the basic specs of LS-1. A model with a different sound nuance.
The LS-2's body top is made of 2 pieces of solid hard maple, and the body back is made of 1 piece of Honduras mahogany. The neck is a one-piece Honduran mahogany deep joint. And the finger slope uses very valuable Jacaranda wood. The binding on the slope side is an edge binding that requires time and skill, but we applied a lacquer finish to it. The woodwork that affects the sound of the guitar is perfect. The hardware includes a cow bone nut, brass bridge saddle, and aluminum tailpiece, which transmits all the vibrations of the strings to the body. Furthermore, the internal wiring uses vintage wire GE70S, an oil condenser (sprag orange drop) for the tone circuit, and CTS for the volume, making every part luxurious.
Body: Hard Maple 2Piece Top, Honduras Mahogany 1Piece Back
Neck: Honduras Mahogany 1Piece Deep Joint
Fingerboard: Jacaranda/Fret Edge Binding
Nut: Bone
Position Mark Cell Urban Color
Bridge: HLS-VB (Brass Saddle)
Tail Piece: HLS-VT (Aluminum)
Pickups: PAF-Vintage MK2
Controls: 2 Volume, 2 Tone, 3Way Toggle SW
Inner Wire: GE70S
Volume Pot: CTS
Condenser: Oil Condenser (Sprague Orange Drop)
Finish: Lacquer Finish
Body Color: CS.VF.LD,GT, VF
Price: OPEN PRICE
*TOKAI for PACIFIX EXCLUSIVE is a made-to-order product.
I assume this is the same company?
PACIFIX DIRECT & OUTLET
Pacifix philosophy
By supporting music and other cultural activities from a variety of angles, Pacifix aims to pursue appropriate profit-making, which is the original purpose of corporate activities, and to realize the welfare of society. is. We aim to become the foundation for people to find happiness through music. Pacifix's activities are based on an enterprising spirit and integrity.
In addition, we always keep humanism and environmental protection in mind, act based on the words ORIGINALITY, IDENTITY, and CREATIVE, and aim to build a NEW STANDARD for our time.
Pacificus puts the brand first. Our brand PROVIDENCE aims to be "the best tools suitable for each era" for people of each era.
Our aim is to spread PROVIDENCE and other in-house developed products not only in Japan but around the world, and to build them into the world's number one brand. However, our goal is not to pursue quantity, but to make the quality and reliability of our products the best in the world.
Pacifix's basic philosophy of product production is to supply the highest quality products in the required quantity to the market, and we do not produce unnecessary products or sell more than necessary in pursuit of profit. It's not our purpose.
A portion of the proceeds from Pacifix Co., Ltd. are used by related organizations to support environmental protection activities such as tree planting, and to provide aid to children around the world.
PACIFIX DIRECT & OUTLET
Pacifix philosophy
By supporting music and other cultural activities from a variety of angles, Pacifix aims to pursue appropriate profit-making, which is the original purpose of corporate activities, and to realize the welfare of society. is. We aim to become the foundation for people to find happiness through music. Pacifix's activities are based on an enterprising spirit and integrity.
In addition, we always keep humanism and environmental protection in mind, act based on the words ORIGINALITY, IDENTITY, and CREATIVE, and aim to build a NEW STANDARD for our time.
Pacificus puts the brand first. Our brand PROVIDENCE aims to be "the best tools suitable for each era" for people of each era.
Our aim is to spread PROVIDENCE and other in-house developed products not only in Japan but around the world, and to build them into the world's number one brand. However, our goal is not to pursue quantity, but to make the quality and reliability of our products the best in the world.
Pacifix's basic philosophy of product production is to supply the highest quality products in the required quantity to the market, and we do not produce unnecessary products or sell more than necessary in pursuit of profit. It's not our purpose.
A portion of the proceeds from Pacifix Co., Ltd. are used by related organizations to support environmental protection activities such as tree planting, and to provide aid to children around the world.
Attachments
Mine originally came with Rolphs, but they have been changed. I am in the process of getting the Rolphs.
No, If Rolphs a LS-1 then.
Rolphs are outstanding pickups. Tokai choose Pretender 59 for these builds which are a bit hotter than 58 ones,
Very difficult to tell from another clone but it can be done.
Rolphs are outstanding pickups. Tokai choose Pretender 59 for these builds which are a bit hotter than 58 ones,
Very difficult to tell from another clone but it can be done.
Last edited:
