Jimmy Page Wiring

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 10, 2005
Messages
10
Reaction score
0
Anyone done this before. I have a feeling the VH1 pickups in my Burny are only 2 wire not 4 so can this still be done without having 4 wire pickups. Thanks guys for any help you can provide.
 
A few different JP mods listed here.

These guys are a good shop and a good resource:

http://www.guitarelectronics.com/category/wiringresources.22pickupdiagrams/
 
The more important modification would be the out-of-phase switch for the middle position which can be realized with a new switchable volume pot that reverses the polarity of only one humbucker. The other mod is splitting the coils of one or both humbuckers which isn't that interesting in my opinion, because it's a rather weak sound not very similar to a real single coil pickup. This modification would need 4-wire pickups though, but not the first one.
 
Back
Top