stratdeluxer
Well-known member
- Joined
- Aug 28, 2002
- Messages
- 129
- Reaction score
- 0
I was messing with some 500k CTS pots tonight that are new extras and I was noticing that most were reading only around 420k or so.I wanted to also make a couple more No Load tone pots for my SG and my Les Paul...
The solution: Take the pot apart and scrape carbon away from the inside ring around the full circle with your ohm meter hooked up...You can literally watch the resistance reading climb as you carefully scrape small amounts of carbon away within the center of the disc..It was very quick and easy to go from the 420k to a bit over 500k..Pretty cool mod for those pots that scimp on the values! ;o) :lol:
John
The solution: Take the pot apart and scrape carbon away from the inside ring around the full circle with your ohm meter hooked up...You can literally watch the resistance reading climb as you carefully scrape small amounts of carbon away within the center of the disc..It was very quick and easy to go from the 420k to a bit over 500k..Pretty cool mod for those pots that scimp on the values! ;o) :lol:
John