Truss Rod Adjustment Tool?
- Thread starter Ducati
- Start date
Help Support Tokai Forum:
deoreo
Well-known member
I am assuming that the nut is an 8mm. if so get one here:
http://www.allparts.com/categories.php?cat_name=TRUSS%20ROD%20WRENCHES
Hopefully someone else can chime in and confirm the nut size.
http://www.allparts.com/categories.php?cat_name=TRUSS%20ROD%20WRENCHES
Hopefully someone else can chime in and confirm the nut size.
deoreo
Well-known member
Ducati said:
Huh, weird, maybe try a small 9mm socket, I don't believe it would be American but 5/16" = 7.9mm and the next common size would be 3/8" = 9.5mm
Skybone
Well-known member
I'd say try a 9mm socket as well, though just be careful with it.
FWIW: If you haven't got one, go to your local hardware/DIY shop/store and find a "T" bar socket set, with sockets. They usually range from about 6mm to 10mm, and are very handy to have around the place.
FWIW: If you haven't got one, go to your local hardware/DIY shop/store and find a "T" bar socket set, with sockets. They usually range from about 6mm to 10mm, and are very handy to have around the place.
