Reborn Old saddle pieces

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Richard W.

Member
Joined
Jan 16, 2009
Messages
17
Reaction score
0
Any tricks known to remove and turn around the saddle pieces in the tune-o-matic type bridge, on my Reborn?
I am having intoantion issues with the guitar and want to try to turn the D, A and E saddles around, to gain a bit more sharpening on the intonation on those strings.
There are some sort of clips holding the screws in the bridge no? :eek:
 
The end of the saddle screw is flaired after it's installed in the bridge-The saddle screw that holds on the saddle has to be forced out of its retaining hole-
I usually use a small flat tip screwdriver and pry up on the slotted end- it'll come out then u unscrew the saddle and turn it around and carefully place the saddle retaining screw back in the hole(I usually screw the saddle in the center of the screw b4 I try to install back
 
Back
Top