chrisheyes
Well-known member
I've just taken delivery of an 82/83 Breezysound from Japan.
Looks like a TE-80 ??
Centre joined 2 piece Ash body with nitro paint
3 Barrel Final Pro Spec Bridge ( Missing grub screw has been replaced now)
The Truss Rod routing is square, not seen this before but it appears original as there is paint on the side
Markings on the end of the neck, control and neck pickup cavity all correlate 1=7 - 64' style Veneer Rosewood fretboard
The Rosewood is very dark and figured. This shows up on a comparison shot with a Fender Japan SRV ST62-86TX and an '83 JV Fender ST62-115.
Pickups are Stamped TE - A
The routing from the neck pickup cavity to the truss rod end is square. This looks original as all of the flat faces have the original Butterscotch paint on them
The neck has a pronounced V shape to it
You can see on the headstock where the original 7okai Breezysound decal was
All put together and set up now .It's a very good Tele.
I just need a well worn flat headed Tone knob to finish it off. Has anyone got one I can buy from ?
Looks like a TE-80 ??
Centre joined 2 piece Ash body with nitro paint
3 Barrel Final Pro Spec Bridge ( Missing grub screw has been replaced now)
The Truss Rod routing is square, not seen this before but it appears original as there is paint on the side
Markings on the end of the neck, control and neck pickup cavity all correlate 1=7 - 64' style Veneer Rosewood fretboard
The Rosewood is very dark and figured. This shows up on a comparison shot with a Fender Japan SRV ST62-86TX and an '83 JV Fender ST62-115.
Pickups are Stamped TE - A
The routing from the neck pickup cavity to the truss rod end is square. This looks original as all of the flat faces have the original Butterscotch paint on them
The neck has a pronounced V shape to it
You can see on the headstock where the original 7okai Breezysound decal was
All put together and set up now .It's a very good Tele.
I just need a well worn flat headed Tone knob to finish it off. Has anyone got one I can buy from ?