japaxes
Well-known member
hi guys , just fitted a four way switch to a telecaster, wiring diagram ok though a lot of people have had problems , just remember to put a direct earth from the pick up cover (neck) and remove the link wire from pick up to cover . all went realy well .. untill refitting the control plate .
Got the extra sound (position 4) got neck pick up (position3) got neck/bridge(position2) but no bridge pick up /on its own (position 1)
only neck/bridge as position 2?
Dropped it round to a tech friend of mine & after checking the wiring he agreed it was as per the diagram. It eventualy worked out that the slot cut out on standard telecasters (f****r/tokai/greco) is too small to allow
the four way switch to make contact on the last position.So please be aware of this as they do not mention this when you buy the switch. Hope it helps ....japaxes
Got the extra sound (position 4) got neck pick up (position3) got neck/bridge(position2) but no bridge pick up /on its own (position 1)
only neck/bridge as position 2?
Dropped it round to a tech friend of mine & after checking the wiring he agreed it was as per the diagram. It eventualy worked out that the slot cut out on standard telecasters (f****r/tokai/greco) is too small to allow
the four way switch to make contact on the last position.So please be aware of this as they do not mention this when you buy the switch. Hope it helps ....japaxes