Stereo cabinets

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ozeshin

Well-known member
Joined
May 14, 2006
Messages
2,076
Reaction score
0
Got a stoopid question...
How does a stereo cabinet work...I have a stereo Quad box and I'm about to add a second amp to my rig.
Is it possible to run both amps into the one cab....or do I need to A/B and only run one at a time?
 
Yes you can run both amps in to one cab, if they are valve amps DON't try to use an AB box after the amps to run them seperately, a valve amp must be connected to a speaker if it's switched on otherwise you will damage the output tranformer.

There should be 2 inputs on the cab, probably 8 ohms each, but check, use the 8 ohm connection on your amp and connect one amp to each input. You can use an AB box in front of the amps to run one at a time, or an ABY box to run them seperately or both together.
 
Back
Top