Paskiaispaska
New member
- Joined
- Oct 4, 2019
- Messages
- 1
- Reaction score
- 0
Hi! Fake or not? I've been told it's from the early 80's...
Images:
https://m.imgur.com/a/tIWg8pl
Images:
https://m.imgur.com/a/tIWg8pl
Fake or not?
- Thread starter Paskiaispaska
- Start date
Help Support Tokai Forum:
mdvineng
Well-known member
I'm not too well up on the breezy but the bridges usually have TOKAI stamped in them below the pickup and the headstock decal doesn't look quite right. others will hopefully jump in and correct this info.
felixcatus
Well-known member
Allen truss rod adjuster and a post 1983 headstock logo, which I thought came with a Philips head adjuster?
Peter Mac
Well-known member
hi guys,
I'm going with 'fake'.
Apart from the points made by 'el gato' and mdvineng, you can add these....
1) neck stamp is wrong font.
2) logo is a re-pro - not cut out properly.
3) body markings are not Tokai
4) pickups have no stamps and wrong wires.
5) Slab fingerboard instead of veneer
6) 6-digit serial number is wrong for Breezysounds
Nice wood though.
Not a Tokai, avoid if possible.
Peter Mac
I'm going with 'fake'.
Apart from the points made by 'el gato' and mdvineng, you can add these....
1) neck stamp is wrong font.
2) logo is a re-pro - not cut out properly.
3) body markings are not Tokai
4) pickups have no stamps and wrong wires.
5) Slab fingerboard instead of veneer
6) 6-digit serial number is wrong for Breezysounds
Nice wood though.
Not a Tokai, avoid if possible.
Peter Mac
