Hi, likely discussed elsewhere, though I couldn't find anything in a search. I have a MIJ LR, 2018 I think (first two s/n are 18), and have been experimenting with PUP height. The neck is very loud, at full vol, and tends to get a better tone when lowered below the ring - in fact, that is how I originally received it from JP. The bridge gets over-distorted if raised high enough to match the neck vol. I believe the PUPs to be OEM and in the correct neck (~9 Ohm) and bridge (~11 Ohm) orientation. Relief .010in; action at 12: Low, 1.5mm; High; 1.0mm.
What are others using for height? TIA
This is what I'm currently using unfretted:
What are others using for height? TIA
This is what I'm currently using unfretted:
- Bridge pickup
- Low E: 3.5mm / 0.14"
Hi E : 3.1mm / 0.12"
- Low E: 3.5mm / 0.14"
- Neck Pickup:
- Low E: 4.0mm / 0.16"
Hi E : 2.8mm / 0.11"
- Low E: 4.0mm / 0.16"